OUR PRODUCTS
150 mm 6” Borewell Submersible Pumps
OMI 150 mm 6” Borewell Submersible pumps are highly energy-efficient products that are lightweight and easy to install with noiseless operations, they are specially designed to withstand high axial thrust load. These pumps are developed and manufactured by the continuous efforts and innovation of our R&D Team with prime experience in manufacturing pumps for the past 50 years.
| Power Range | 3 HP – 25HP |
| Phase / Voltage Range | 350 – 415V, Three Phase, 50 Hz, A.C. Supply |
| Maximum total head | 400 meters |
| Maximum flow rate | 68400 lph |
| Maximum Outer diameter in mm | 147 mm |
| Nominal outlet size in inches | 1.5”, 2”, 2.5”, 3”. (40,50,65,80 mm) |
| Rotor | Copper Brazed Rotor |
| Bush | LTB 4 Bush / Carbon |
| Bearing | Carbon Pad with Segment Bearing |
| Impeller | SS |
| Casing | SS / CI |
Applications
| Material of Construction of Pump | |
| Part Name | Material |
| Check Valve housing | Cast Iron |
| Check Valve Seat | Nitrile Butyl Rubber |
| Diffuser Chamber | SS 304 & Cast Iron |
| Impeller | Stainless Steel 304 & LTB 2 |
| Diffuser | Noryl, Long-lifeCast Iron, SS |
| Suction Inter Connector | Cast Iron |
| Inlet Screen | SS 304 / 202 |
| Pump Shaft | SS 410 / 304 |
| Cable Guard | SS 304 / 202 |
| Coupling | SS 410 / 304 |
| Material of Construction of Motor | |
| Part Name | Material |
| Stator Shell | Stainless Steel 304 / 202 Half Steel Body ( SS / MS ) |
| Shaft | Stainless Steel 410 |
| Journal Bushes | Leaded Tin Bronze |
| Thrust Assembly | Stainless Steel 420 and Graphite Carbon / Segment Type Thrust Bearing. |
| Base, Oil Seal, Lower and Upper Housing | Cast Iron and SS 304 / 410 |